Features:

sales@hicotek.com
  • Specification
  • Details
  • Drawing
  • Enquiry
  • Recommend

Features

  1. 16-port 10/100BASE-T Gigabit Ethernet RJ45 copper with POE function

  2. 1 1.25Gbps SFP interfaces(Combo with one uplink RJ45)

  3. 2-port 10/100/1000BASE-T Gigabit Ethernet RJ45 copper

  4. Complies with IEEE 802.3af/at Power over Ethernet end-span PSE

  5. Up to 16 ports of IEEE 802.3af/802.3at devices powered

  6. Supports POE power up to 30.8 watts for each POE port

  7. Each port supports 52V DC power to POE powered device

  8. 250-watt POE budget

  9. Auto detects powered device

  10. Circuit protection prevents power interference between ports

  11. Remote power feeding up to 100m in standard mode

  12. Hardware based 10/100Mbps auto-negotiation and auto MDI/MDI-X

  13. Flow control for full duplex operation and back pressure for half duplex operation

  14. IEEE 802.1Q VLAN transparency

  15. Hardware DIP switch for Standard, VLAN and Trunking, can control 16 POE ports VLAN and        make the uplink Ports working in trunking mode.

  16. Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing

  17. 10 KB Jumbo frames support                                                                                              Unmanaged 100Mbps 2 RJ45 Gigabit and 1giga SFP 16 Ports Gigabit 8-Ports 10/100/1000m 16+2 Giga/SFP Combo Poe Switch

ItemDescription
ModelHC-716EP-2G1SFP
Power SupplyPower Supply Mode Mains on load
Voltage RangeAC 100~240V
Power ConsumptionThe device<15W,                                                       
 POE power supply<250W
Network Port ParameterNetwork Ports 1~16 Ports: 10/100Mbps Ethernet port, adaptive control
UPLINK 2 Ethernet port: 10/100/1000Mbps Ethernet port
Uplink SFP:1.25Gbps
Transmission Distance1~16 Ethernet Port:0~100m
2 Ethernet Uplink Port:0~100m
1 SFP: According to different SFP
Transmission Media1~16 Ethernet Port:Cat5e/6 standard UTP cable,
2 Ethernet Uplink Port:Cat5e/6 standard UTP cable
1 SFP: LC interface optical fiber
POE AgreementIEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
POE Power Supply ModeEnd-span method
POE Power Supply WattageEach port≤30W,Whole device<250W
Network Switch SpecificationNetwork StandardIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3z Gigabit SX/LX
IEEE 802.3x flow control and back pressure
Swap ModeStore-and- forward
Switch Capacity7.2Gbps
MAC Address List8K
Status IndicatorsPower Indicator LightOne power light (green)
Optical Fiber Port IndicatorOne fiber link indication light ( green), Green light keeps on when the fiber port is well connected; Blinking when transceiver data
Uplink PortLED (Green): On, port is link on; Off, port is link down;
POE Indicator1~16 POE indicator light
POE Network Port LED1~16 port ( green light on RJ45 jack) Keeps on when normally connected, Blinking when transceiver data
Switch VLANPorts 1 to 16 in port vlan, after change switch, need restart power switch in back
CCTVPorts 1 to 16 in port support 250 meter, after change switch, need restart power switch in back
Protection LevelSurge ImmunityLevel 3, executive standard:IEC61000-4-5
Electrostatic Protection1a touch electric discharge: level 3                       
 1a Air discharge: level 3                               
 Executive standard:IEC61000-4-2
Operating EnvironmentWorking Temperature-10ºC~55ºC
Storage Temperature-40ºC-85ºC
Humidity(non-congeal)5~95%
Mechanical AttributesDimensions (L*W*H)330 x 205 x 44.5mm
ColorBlack
Weight3kg
ReliabilityMean time between failures (MTBF)>50000h


Please enter your inquiry details such as model no., lens, color,quantity,ect .